Equipment needed in hydraulic, pneumatic systems
Flushing device
Flushing is the separation of contaminated particles from the oil and hydraulic system with the help of a filter with a high fluid flow rate and appropriate temperature. In this condition, the oil separates the particles in the system and the internal walls of the pipes and pores at a high speed and with the help of turbulent flow, and after passing them through all the paths, they are finally separated by filters. Iranian Sepahan Hydraulic Company is equipped with a flushing device with an output flow of 1500 liters and a standard Parker 0990 filter with the ability to separate particles of 3 microns, 5 microns and 10 microns, and the volume of the tank is 5000 liters. And so far, the flushing operation in Mobarakeh Steel Company, Gol Gohar, Railway Industries has been carried out by this group
Also, in 1376, the first flushing machine was built on the order of Manzome Foolad Company, and after that a number of them were designed and built for our dear customers.
Hydraulic hydrotest up to 3500 bar
Hydro test is done with two methods of water jacket and direct expansion or without water jacket. In hydro test, the pressure will increase up to one and a half times the working pressure of the hydraulic system. Iranian Sepahan Hydraulic Company is equipped with all kinds of pneumatic (air) hydrotest devices, electric and manual hydrotest devices up to 3500 bar pressure. It is also possible to carry out hydrotest projects by Sepahan Hydraulic Company of Iran.
Slab turning device
It is a steel plate slab with maximum dimensions of 12x12x0.25 m3 and weighing 50 tons, which is turned into a sheet coil after rolling. In this process, it is necessary to turn it 180 degrees before rolling, and due to the heavy weight and high number of slabs, a device is needed to do this. This device uses several hydraulic cylinders along with a mechanical system to prevent From shrok when changing the angle of the slab, which causes the slab to return to the other side slowly and without vibration.more information)
Hydraulic lifts
Hydraulic lifts have been welcomed due to their uniform movement, the possibility of moving heavy loads and relatively good efficiency, but one of the problems of hydraulic lifts is shock and impact when starting and stopping, which is achieved by using special hydraulic valves and methods. The new ones have solved this problem. The merits of hydraulic lifters are high capacity (in terms of weight) and low maintenance costs.
In 1972, we were one of the first companies to lead in the design and manufacture of hydraulic lift systems, and we gradually limited our orders to super-heavy lifters (5 tons and above) for moving cars, factory warehouses, etc. For more information about completed projects, please click
Trailer and truck unloading jack
It is very useful in ports, sugar factories, flour, oil and wheat storage silos for quick bulk unloading.
We are proud to consider the needs of the market in 1978 to design and manufacture a trailer unloading jack in Golbaharspahan factory and after that equipping the system of factories such as Naqsh Jahan sugar, Piranshahr sugar, Baharestan wheat silo, etc. we scored
